新書推薦：
《
中西之外：华夏世界观与人类学
》
售價：HK$
85.8
《
匹诺曹：非存在的存在（阿甘本另类解读《木偶奇遇记》 流浪木偶匹诺曹的哲学启示）
》
售價：HK$
72.6
《
跨越时空的蜂鸟家族（约翰·古尔德的鸟类手绘图鉴）
》
售價：HK$
184.8
《
成功的法则：掌控人生的关键能力
》
售價：HK$
64.9
《
黄宗羲传
》
售價：HK$
74.8
《
教育研究量表手册 21世纪教育科学系列教材
》
售價：HK$
97.9
《
真事隐：康熙废储与正史虚构
》
售價：HK$
85.8
《
工艺之美（席曼婷）
》
售價：HK$
97.9
|
| 編輯推薦： |
|
编辑推荐：《铸造手册大全：金属铸造工艺、冶金技术和设计》为从事铸造行业的科研人员和工程技术人员提供全面的指导和参考。目前国内尚没有如此完整介绍金属铸造工艺、冶金技术和设计、铸件质量控制和后续处理以及性能检测等方面的手册。
|
| 內容簡介： |
内容简介：《铸造手册大全：金属铸造工艺、冶金技术和设计》由Elsevier授权影印出版。原版为全一册（共19章），考虑到内容的相对独立以及使用方便，影印版分为6册。
第1册熔体卷入流动（第1～3章）。主要介绍金属熔体，包括熔体与周围环境可能发生的反应、熔体的流动性和可能存在的各种卷入性缺陷。
第2册铸型和型芯凝固组织铸造合金（第4～6章）。第4章主要介绍铸型和型芯，包括铸型的性质、铸型和金属之间可能发生的反应。第5、6章主要介绍凝固组织的生长和可能存在的问题以及各种典型的铸造合金组织。
第3册孔洞热裂和冷裂-铸件的性能（第7～9章）。第7、8章主要介绍铸件中可能出现的缩孔和裂纹等缺陷。第9章主要介绍铸件的力学性能、抗氧化性能、耐腐蚀性能、密封性能以及表面处理。
第4册获得优质铸件的10项准则（第10章）。
第5册浇注系统设计基础、组成和设计实例（第11～13章）。主要介绍浇注系统的设计、组成，并给出浇注系统设计的实例分析。
第6册熔炼造型铸造凝固（第14-19章）。分别介绍铸造合金的熔炼、铸型材料和铸造成型方法的选择、凝固技术和铸件尺寸精度的控制、铸件的后续处理和探伤等。
|
| 關於作者： |
|
作者简介：作者John Campbell（约翰坎贝尔）OBE，英国伯明翰大学（铸造专业）教授，铸件行业国际领先人物，Cosworth Casting的创始人及Baxi铸造方法的发明人。
|
| 目錄：
|
目录
第7章 孔洞
7．1 收缩
7．2 气孔
7．3 孔洞的识别
第8章 热裂和冷裂
8．1 热裂
8．2 冷裂
第9章 铸件的性能
9．1 试棒
9．2 失效统计
9．3 缺陷的影响
9．4 拉伸性能
9．5 断裂韧性
9．6 疲劳性能
9．7 弹性（杨氏）模量和阻尼性能
9．8 残余应力
9．9 高温拉伸性能
9．10 抗氧化和耐腐蚀性能
9．11 密封性
9．12 表面处理
9．13 质量指数
9．14 无双层膜时性能
|
| 內容試閱：
|
前言
In this first update of the Handbook， the major revisions are probably those relating to running system design in wluch thevestiges of filling defects have finally been eliminated from castings.
Thus， the powerful benefits of contact pouring （in which the uruversal conical trumpet decorating all traditional filling systems is now elinunated） is finally shown to have been hugely underestimated by a number of foundries. Contact pouring has probably been the most important （and the most simple and zero-cost） initiative to revolutionise quality in castings. In addition， the adoption of various forms of tangential filter designs to gates has finally eliminated the problem of the entrainment of priming bubbles. These residual bubbles have long impaired the benefits of previous filling systems.
Gravity pouring has now advanced to the point at which I find myself having to admit that it starts to threaten my cherished and favoured casting production system： countergravity.
This is seen to be especially true for those low-pressure systems which use a refractory lining for the pressurised furnace. I only recently discovered the hugely damaging emission of bubbles from these linings during depressurisation of the furnace. This problem has clearly been a major source ofimpaired castings in the low-pressure casting industry and has hampered this industry since its beginnings.
The use of my pneumatic pump is described for the first time. It would lower costs and solve most of the problems of this industry. Thus，l continue to stand by countergravity as the optimum casting system where it can be used. My hope is that it will be teamed up with a good melting and metal handling system. Only careful foundry design will minimise bifilm populations in metals. Only when castings can be produced substantially free from bifilms will we enjoy the full benefits of castings， and metals in general， resistant to hot tearing， cracking， blisters， corrosion pitting and attack of grain boundaries， plus the benefits of extraordinary mechanical properties， potentially eliminating future failure by fracture or fatigue.
These are heady predictions. However， early results in foundries are already indicating that beautiful defect-free castings with revolutionary metallurgical benefits appear to be routinely attainable. Despite challenges from the undoubtedly unique benefits of such new processes as additive manufacture， my hope for the future for castings is based on the adoption of simple principles which could not only secure the future of our casting industry， but improve the welfare and environment of all of us whose lives depend on it.
|
|
購物車/收銀台(0) | 在線留言板
| 付款方式
| 運費計算
| 聯絡我們
| 幫助中心 |
加入書簽
HOME
新書上架
暢銷書架
